Stans No Tubes

Sealant Injector Syringe

While this is a must-have for Stan's NoTubes setup, a simple clip on the outside of the syringe to hold it to a spoke while you pour the fluid in would be helpful. Since the particles in the fluid settle rapidly, I want to inject the best mixture into my tires for the best sealing action. So I setup the syringe on the tire first, pull the plunger and pour the mixture in, then push the plunger down. To do this, I need 3 hands: 1 to hold the syringe, one to pour the fluid, another to insert the plunger. A clip for the syringe would make it much easier...

If you use Stan' NoTubes Sealant, this is by far the easiest way to add sealant to your tire without breaking the bead seal on your rim. No longer is adding sealant to your tire a chore.

Using the injector works far better than pouring the fluid into the tire past the bead. Much easier and less mess. It's not mess-free though. Some fluid leaks out while threading the fitting onto a valve stem. Great for refills, so you don't have to unseat the tire bead.