sign in
SRAMS600 8-Speed Square Taper Crankset - 22-32-42t
5.0
0 available in-store, 200 available online
FREE SHIP
Leaves Next Fri.
Leaves Next Fri.
Labeling and Finish mesh perfectly with SRAM drivetrain families. Forged arms increases the strength and reliability paired with smooth shifting 8/9-speed chainrings to give you the best combination of looks, performance and price. Uses a classic square BB interface and is intended to compliment X.4 and X.5 Families.
- 175mm arm length
- 8-speed compatible
- Square taper bottom bracket
- 22/32/42t triple
- 113/118mm BB width for 48.5/51mm chainline
Specifications
Bottom Bracket Included
No
Bottom Bracket Shell Width (mm)
68, 73
Chain Compatibility
3/32", 6/7/8-Speed
Chainring BCD
104/64mm, 104mm, 64mm
Chainring Setup
Mountain Triple
Color
Black
Crank Arm Length
175mm
Frame Interface
English Threaded
Intended Use
Mountain
Pedal Spindle
9/16"
Spindle Interface Type
Square Taper - JIS
UPC
710845646065
MPN
00.6115.436.020
Tree Fort ID:
333222387588
Customer Questions
Q.
asked by: a guest
Can I remove the 22 and 42 tooth chain rings and just use the 32 tooth ring for a 1x7 setup
Can I remove the 22 and 42 tooth chain rings and just use the 32 tooth ring for a 1x7 setup
A.
anwered by: jackivey
You can. However, usually 1x drivetrain systems use a "drop stop" chainring to keep the chain from falling of the front chainring. With the relatively small cassette, this might not be an issue, though.
You can. However, usually 1x drivetrain systems use a "drop stop" chainring to keep the chain from falling of the front chainring. With the relatively small cassette, this might not be an issue, though.
Q.
asked by: a guest
What size is the pedal threading for the SRAM S600 crank?
What size is the pedal threading for the SRAM S600 crank?
A.
anwered by: canteau
The SRAM S600 crank uses standard 5/16" pedals.
The SRAM S600 crank uses standard 5/16" pedals.
Q.
asked by: a guest
Will this fit my GT pro aggressor
Will this fit my GT pro aggressor
A.
anwered by: canteau
It will as long as you use the right bottom bracket.
It will as long as you use the right bottom bracket.
Q.
asked by: a guest
will this work with 6 speed freewheel?
will this work with 6 speed freewheel?
A.
anwered by: canteau
Most 6-speed bikes use a 3/32" chain, so it could work, but there are more factors than just the number of speeds the bike has.
Most 6-speed bikes use a 3/32" chain, so it could work, but there are more factors than just the number of speeds the bike has.
Q.
asked by: a guest
Will this fit a early 2000 specialized Hardrock with a 110.5 square taper bottom bracket. All stock parts.
Will this fit a early 2000 specialized Hardrock with a 110.5 square taper bottom bracket. All stock parts.
A.
anwered by: canteau
You will need to change the bottom bracket to either a 113mm or 118mm square taper depending on the chainline used by the bike, which will most likely require the 113mm.
You will need to change the bottom bracket to either a 113mm or 118mm square taper depending on the chainline used by the bike, which will most likely require the 113mm.
Q.
asked by: a guest
Will this be an adequate replacement for a sram truvativ isoflow crankset or will I need to replace the bottom bracket as well? Thanks
Will this be an adequate replacement for a sram truvativ isoflow crankset or will I need to replace the bottom bracket as well? Thanks
A.
anwered by: canteau
It depends on what width bottom bracket your cranks had, if it's 113mm or 118mm you will probably be good to go.
It depends on what width bottom bracket your cranks had, if it's 113mm or 118mm you will probably be good to go.
Q.
asked by: a guest
Does this come with the crank arm bolts?
Does this come with the crank arm bolts?
A.
anwered by: canteau
The cranks do not include bolts, which are sometimes included with the bottom bracket.
The cranks do not include bolts, which are sometimes included with the bottom bracket.
Q.
asked by: a guest
Will it fit Shimano BB UN-72, 68mm by 113mm (or 115MM I have to double check to be certain which) on '98 Cannondale KillerV 700. Also are the chain rings replaceable? Original crank is 94/58 (Cannondale CODA - probably Sugino) and now finding replacement rings very difficult and limited). Currently 8 speed may convert to 9 speed a little down the road. Thanks.
Will it fit Shimano BB UN-72, 68mm by 113mm (or 115MM I have to double check to be certain which) on '98 Cannondale KillerV 700. Also are the chain rings replaceable? Original crank is 94/58 (Cannondale CODA - probably Sugino) and now finding replacement rings very difficult and limited). Currently 8 speed may convert to 9 speed a little down the road. Thanks.
A.
anwered by: canteau
If the stock bottom bracket is 113mm you should be able to bolt this right up unless the frame requires a wider chainline, then you might need to get a 118mm bb. The chainring s are standard 104/64 steel TruVativ Trushift chainrings and will work with 8/9-speed.
If the stock bottom bracket is 113mm you should be able to bolt this right up unless the frame requires a wider chainline, then you might need to get a 118mm bb. The chainring s are standard 104/64 steel TruVativ Trushift chainrings and will work with 8/9-speed.
Q.
asked by: a guest
Is this crank set compatible with a bottom bracket BB-UN52?
Is this crank set compatible with a bottom bracket BB-UN52?
A.
anwered by: canteau
It will work with all Shimano square taper bottom brackets as long as they are the right length.
It will work with all Shimano square taper bottom brackets as long as they are the right length.
Q.
asked by: a guest
Will if fit my fat tad recumbent?
Will if fit my fat tad recumbent?
A.
anwered by: canteau
It should as long as you use the right bottom bracket spindle length.
It should as long as you use the right bottom bracket spindle length.
Q.
asked by: a guest
Will it work with 9 speed?
Will it work with 9 speed?
A.
anwered by: canteau
Yes, the SRAM S-600 crankset is compatible with 9-speed drivetrains.
Yes, the SRAM S-600 crankset is compatible with 9-speed drivetrains.
Q.
asked by: a guest
Hello, My bike has a VP-BC73 cartridge BB (shimano tourney crankset, 7spd cassette). Will this crankset retrofit? Thanks Team
Hello, My bike has a VP-BC73 cartridge BB (shimano tourney crankset, 7spd cassette). Will this crankset retrofit? Thanks Team
A.
anwered by: canteau
If your current bottom bracket has a 118mm spindle you should be able to replace it without replacing the bottom bracket, if not you will need a 118mm JIS (Shimano type) square tapered bottom bracket.
The spindle size of your current bottom bracket should be printed or stamped on the cartridge body.
If your current bottom bracket has a 118mm spindle you should be able to replace it without replacing the bottom bracket, if not you will need a 118mm JIS (Shimano type) square tapered bottom bracket.
The spindle size of your current bottom bracket should be printed or stamped on the cartridge body.
Q.
asked by: a guest
Will a shimano BB UN 55 73 by 122.5 work with this crank??
Will a shimano BB UN 55 73 by 122.5 work with this crank??
Q.
asked by: a guest
Weight?
Weight?
A.
anwered by: canteau
Unfortunately, SRAM does not publish the weight for the S600 crankset.
Unfortunately, SRAM does not publish the weight for the S600 crankset.
Q.
asked by: iguanodon
Is this 7spd compatible?
Is this 7spd compatible?
vote
vote
Sales and Deals 
Chat Now