Searching...
sign in
This product has been discontinued, but we can help!
Show All Products From Bushnell
Show Eccentrics From Bushnell
Possible replacements for the
Eccentric Bottom Bracket 68mm
Eccentric Bottom Bracket 68mm
---- Archived Product Data ----
BushnellEccentric Bottom Bracket 68mm
4.5
We're sorry, this product has been discontinued.
Show Products From Bushnell
- BB Shell = Inside Diameter 2.120 /- .010 inches (53.848 /- .25mm)
- Shell Width = 66mm (64mm to 68mm will work fine)
- Accepts standard 68mm English thread BB
- Works with outboard bearing style BBs
- Replacement BB for Salsa Juan Solo and El Mariachi frames
Review Summary
LIKES
Price (1),
Looks (1),
Simple to Use (2)
WORKS FOR
no tags yet
DISLIKES
none
4.5 GEARS
4 reviews
4 reviews
Customer Questions
Q.
asked by: a guest
Will this fit an older Niner EBB Bushnell that used set screws.
Will this fit an older Niner EBB Bushnell that used set screws.
A.
anwered by: a guest
If you contact Bushnell directly, there are shims available for 55mm and 57mm ID shells. bushnelltandems.com
If you contact Bushnell directly, there are shims available for 55mm and 57mm ID shells. bushnelltandems.com
Q.
asked by: a guest
Is there a Bushnell EBB that replaces the Gary Fisher RIG wedge style EBB?
Is there a Bushnell EBB that replaces the Gary Fisher RIG wedge style EBB?
A.
anwered by: a guest
Yes, there are shims available for 55mm and 57mm ID shells. bushnelltandems.com
Yes, there are shims available for 55mm and 57mm ID shells. bushnelltandems.com
A.
anwered by: canteau
If Gary Fisher uses a standard EEB bottom bracket shell (53.848 /- .25mm) this should work.
If Gary Fisher uses a standard EEB bottom bracket shell (53.848 /- .25mm) this should work.
Customer Reviews
4
July 01, 2011
reviewed by: A Guest
Replaced a poorly designed Cannondale EBB with the Bushnell. So far - works great, adjust easier and doesn't seem to freeze in the frame like the Cannondale unit did. Would be nice to be able to set the inboard outboard alignment once installed but it's not hard to align the chain so that's a minor gripe.
Price is a bit high for what it is but at least it works.
vote
vote5
February 10, 2012
reviewed by: skijunki
Tree Fort had the best price on this ebb by far. The Bushnell is simple and well manufactured. It is such a clean solution for the replacement of the sloppy, heavy set screw ebb I had.
4
April 12, 2012
reviewed by: tni...@ya...o.com
Great replacement for the C'dale ebb. Adjustment is on the non-drive side like it should be.
5
October 20, 2012
reviewed by: scottatodd
Expensive, but worth every penny. Original (cheap) eccentric bottom bracket (Cannondale) on 2011 RT2 started creaking. I hate creaking, as my bikes must be silent and well tuned (I am picky!). Tried to adjust, but it basically fell apart. This Bushnell is the first EBB that I've had which works like you THINK it should. If you unscrew all the way, then it's finger loose. If you tighten to torque spec then it won't budge (and won't sqeak). No hammers, no frustration. All is tuned, adjusted, and SILENT. This is a 'set it and forget it part'. Just buy it and forget what it costs -- the quality and ease of use outweighs the price. Good service by Tree Fort Bikes, too!
Sales and Deals 
Chat Now