Enduro

Bottom Bracket Kit for SRAM Outboard Bearing Bottom Brackets

Rebuilding your bottom bracket is a great way to increase performance through better quality bearings while saving money over replacing the whole bottom bracket. Enduro bottom bracket bearing replacement kits use larger 5/32" ball bearings than the stock SRAM bearings to increase the net load capabilities by roughly 20%. The increase load capabilities and better dual lip seals mean these bearing should have increased durability.

SRAM's GXP bottom brackets use a tapered 22/24mm spindle. Most bottom bracket bearings simply use a spacer to reduce the 24mm ID bearing down to 22mm which adds a friction point that can cause noise if dirt or water gets between the spacer an bearing roller. Enduro uses a thicker roller for quiet performance.

It is recommended that you use Enduro''s bottom bracket bearing tool to swap out the bearings. Using other tools can damage the bearing, bottom bracket cup or both.

• Includes 2 Enduro bearings with an ID 22/24
• Bearings feature larger 5/32" balls
• Rebuilds 1 GXP bottom bracket
• Enduro bearing tool recommended

Enduro sealed bearings are known for excellent low drag dual lip seals and larger 5/32" bearing balls to perform smoothing under load in all types of weather conditions.