SRAM

Level T Disc Brake

The SRAM Level hydraulic disc brakes use the reliable design of the Guide brakes, but move from an All Mountain/Enduro focused 4-piston design to a traditional 2-piston design suitable for XC and Trail use. By moving from 4 to 2 pistons SRAM is able to reduce the size of both the caliper and lever to reduce system weight on the Level disc brake when compared to the comparable Guide disc brake. 

SRAM uses the same Bleeding Edge bladder design to make bleeding the system a quick and easy process. Level brakes come pre-bled with SRAM DOT 5.1 fluid that provides a higher boiling point over older DOT 4 fluid. 

SRAM Level T disc brakes replaces the SRAM DB3 and brings the same re-engineered internals found in the Level Ultimate and Level TLM disc brakes but in a package that meets the needs and budgets of the sport level rider.

On the lever side of the Level T disc brake, SRAM uses a stamped aluminum lever blade, steel hardware and bushing for a smooth and consistent level pull. SRAM's Direct Link pull ratio provides even power through out the entire lever stroke. Level T brake levers are compatible with SRAM 2-bolt Matchmaker shifters. Level T brake levers can be used on the Right or Left side depending on your braking preference.

The Level T Caliper is a traditional 2-piece design. Level T disc calipers come with SRAM Organic Compound pads with steel backing plates. 

• Pre-bled with 950mm front and 1800mm rear hoses
• SRAM Centerline rotors are recommended
• IS adaptors and rotors sold separately
• 410g with 800mm of hose and 160mm CenterLine rotor